Search:



Filtercor offers a wide variety of carbon cartridges which can be used as a one step filtration treatment or as a secondary processing. UFJ['s cartridges eliminate the problems associated with loose carbon and can be used in single or multi-tubed vessels. Our filters can range from 2-3/4" OD to 5" OD with varying lengths from 4" to 40”.

Be assured, FilterCor can custom meet your needs with our standard product line

Filtercor offers five basic carbon styles:

FC-MC The impregnated carbon cartridge is constructed with an outer layer of polyolefin and synthetic fibers which removes solid particles and protects the inner carbon powder layer from premature clogging. The sulfur-free carbon powders form a fixed bed which provided increased carbon treatment capacity. These can be used for removal of chlorine, foul tastes & odors as well as sediment. This is an ideally economical replacement for plating and photo processing solutions.
FC-M This activated carbon cartridge is constructed of carbon via a wet-molded production process using a blend of powdered and granulated coconut shell activated carbon (90% with an incorporated synthetic fiber binder (l 0%). This pre-filtration unit removes solid particles and protects the inner carbon powder pores from being spent prematurely. This process allows the carbon tubes to absorb up to four times the amount offree chlorine as the UPAMC carbon tubes. These can be used for potable water purification, removal of chloroform, sediment reduction and even purification of plating and photo processing solutions.
FC-C

This porous shell carbon cartridge has been designed primarily for use in removing organics and particulate contaminates from plating, acids, alkaline and hydrocarbon solutions. The prefiltering outer shell is a strong and non-corroding polyethylene with plastisol end caps. This shell allow traps most of the oil/water contaminates before processing though the carbon media. There is 9 ounces of coconut activated carbon per 10 inch length. This provides and extended life of up to 50% over other like filters. Excellent for use in removal of chlorine, foul tastes & odors, organic chemicals and sediments. Ideally suited for waste and process water recycling.

As a special note, this shell style carbon can be substituted for clay or zeolyte.
FC-CP

This is an outer wind carbon cartridge which encapsulates layers of impregnated carbon cellulose paper with a very low sulfur content. This provides three filters in one -a string inner wind, surrounded by carbon paper and a final layering of string. The outer wind acts as a pre-filter, the carbon removes organic contaminants, foul tastes or odors; and the inner wind is a polishing 5 micron that collects any finer microns before passing through clear solutions to your filtration needs.

As a special note, this item can be produced in various string media and core options.
FC-GC

This is an outer wind carbon cartridge as listed above. This style uses granular carbon instead of the paper. The outer wind is a first account filtration before the liquid passes through a special bag holding fine granular coconut activated carbon; before reaching the 5 micron polishing inner wind. Highly recommended for removal of chlorine, foul tastes, odors & colors, in addition to purification of plating and photo processing solutions. Excellent for use in waste and process water applications.

As a special note, this item can be produced in various string media and core options.

 

CARBON FILTER CARTRIDGES

Filtercor carbon cartridges are a one-step carbon and filtration treatment. These cartridges eliminate the problems associated with loose carbon treatment and the need for a separate filtration system. The standard cartridges measure 2 3/4” OD with lengths varying from 4” to 40” and flow rates up to 2 1/2 gpm. These cartridges are designed to be used in either single or multi-tubed vessels.

Carbon styles include high grade highly activated granular coconut carbon, carbon impregnated paper, and wet molded carbon block. Outer wind materials include standard polypropylene, fibrillated polypropylene, and bleached cotton. Other exterior materials available include shells of porous polyethylene and a webbed material of polyolefin and synthetic fibers. Many factors influence the rate and magnitude of adsorption on activated carbon. A few of the more important factors are the chemical nature of the substance being adsorbed, the type of solution it is being adsorbed from, and the type of system in which the carbon is being used. Due to those factors and our desire to meet each of our customer’s needs, we manufacture and provide a wide range of activated carbon cartridges.

Available PDF Datasheets

1.Carbon Filter Cartridges

To request a catalog or other information, please fill out and submit the form below. A representative will respond to your request shortly.

click here

Features

Economically Priced

Sediment and Taste/Odor/Chlorine Filtration

Organic Impurity Removal

Non-Contaminating

Recommended for:

Amines, glycols, sulfanols

Water Purification

Vending Machines

Photographic Solutions

Dechlorinating

Plating Solutions

Oil Removal

Aromatic Compounds

High Molecule weight alcohols

Color Removal

Drinking Water

Cooling Tower Treatments

Available in standard and “Big Blue” ODs





This product was added to our catalog on Monday 02 March, 2009.


Copyright © 2013 FilterCor. Powered by Zen Cart  |  Privacy Notice